Top 10 typical forklift crashes ， forklift procedure must focus on these issues ！.

Top 10 typical forklift crashes ， forklift procedure must focus on these issues ！.

Blog Article

Don't underestimate the forklift at work. If the procedure is bad, there will be significant accidents in minutes, and there are numerous accidents including forklifts.

Instance 1: The forklift freight blocked the chauffeur's view, and the person in front might not be found, leading to a moving crash.
Case 2: In order to preserve the equilibrium of the forklift when raising heavy goods, the workers used their body weight as the counterweight, which almost created casualties.
Situation 3: The width of the forklift freight surpasses the permitted width of the route and holds on the roadside shelf, which practically creates an mishap.
Case 4: Forklift is speeding and surrender during a turn.
Instance 5: The forklift chauffeur did not notice the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift lifts the employees illegally, the forklift driver does not use the safety belt, the forklift lifter falls and the vehicle driver is squashed when the forklift rolls over.
Situation 7: The forklift chauffeur did not put on a safety belt and dropped from the car when it rolled over and was squashed.
Forklift operation need to pay attention to these matters ：.

Start.
1. Prior to beginning, observe the surroundings, and after validating that there are no barriers that hinder the security of driving, honk the horn first and afterwards start.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale must be secure prior to starting.
3. When the forklift begins with a lots, the driver needs to first confirm that the load is stable and trusted.
4. The beginning must be slow and constant.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the pole must be slanted backward. .
2. Do not lift the fork too expensive when driving. When entering and leaving the job website or while driving, take care that there will be no challenges overhead. When the lots is traveling, the fork must not be raised expensive, which will certainly affect the security of the forklift. .
3. After discharging, the fork should be decreased to the regular driving setting before driving. .
4. When turning, if there are pedestrians or automobiles close by, the driving signal should be released first. High-speed doglegs are banned. High-speed sharp turns will certainly trigger the car to lose side stability and tip over. .
5. When the forklift is downhill, it is purely forbidden to switch off the fire and slide, and it is restricted to brake unexpectedly while driving with loads unless there are special conditions.
6. When the forklift is running, it has to obey the website traffic rules in the manufacturing facility and have to maintain a particular safety and security range from the vehicle in front. .
7. When the forklift is running, the lots must be in the lowest position that does not impede the driving, and the gantry must be properly tilted back. The load shall not be increased other than when stacking or loading. .
8. The height of the load need to not block the motorist's sight. In special situations, when the product affects the forward vision, drive at a low rate when turning around.
9. It is forbidden to activate the ramp, neither to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility area is 5 km/h, and it has to drive securely at a reduced rate when getting in the manufacturing workshop area. .
11. When the forklift is raised, lifted or driven, it is forbidden for employees to depend on the fork to hold things and play a stabilizing function. .
12. If problems are located, they will certainly be repaired and reported in a timely manner, and they will certainly never ever operate with ailments or conceal them.

packing and unloading.
1. When fork-loading things, the range between both forks need to be adjusted as required to make the load of both forks balanced and not manipulated, and one side of the product must be against the rack. .
2. It is forbidden to collaborate with a single fork or make use of a fork top or draw. In unique scenarios, safety indication should be established to remind surrounding pedestrians. .
3. In the process of loading and unloading things, the forklift should be stopped with the brake. .
4. The speed of the automobile must be slow-moving and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and harm individuals. .
5. When using a fork to fork the goods, the fork needs to be as deep as possible under the tons, and it should be noted that the fork suggestion ought to not touch various other goods or items. The lots ought to be maintained with very little back tilt of the gantry so that the tons does not slide in reverse. The mast can be tilted onward slightly when the lots is reduced to allow for simple positioning of the load and extraction of the forks. .
6. It is restricted to fork goods at high speed and hit tough objects with the fork head. .
7. When the forklift is working, it is prohibited for individuals to loaf the fork, so as to avoid the collapse of the goods and harm individuals. .
8. Straining is prohibited, and it is restricted to utilize forks to raise employees to engage in high-altitude operations to prevent high-altitude dropping mishaps. .
9. It is not permitted to utilize the brake inertia to slide, place, round or roll things. .
10. It is not permitted to use forks to pick, turn pallet discharge.

Leaving .
1. It is prohibited to Electric Forklift Truck for Warehouse leave the forklift when the products on the fork impend. Prior to leaving the forklift, you have to dump the goods or reduced the fork structure.
2. Draw the hand brake take care of to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique conditions, such as the vehicle driver does not leave the vehicle's line of sight and does not exceed 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance ought to be checked, and fuel, lubing oil and air conditioning water must be included.
2. Inspect the safety performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are total and effective.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature are regular.
5. After the forklift is running, the exterior leakage should also be examined and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You must examine prior to leaving the automobile;.
2. When you experience someone before you during driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the freight need to be 0.3 m ~ 0.4 m above the ground;.
5. The turning need to not be as well sharp to stop the tendency of " totally free switching";.
6. Running up and down the incline must be slow and consistent, and no switching on the slope is enabled.
7. Do not drive across the slope. When the gradient is more than 10%, the car should be driven in reverse when going downhill;.
8. When the forklift employees bring the goods and move forward, if they run into large or hefty goods and most likely to the chauffeur's line of sight, they should take the turning around exercise
.
The "Eight Prohibitions" must be followed in the operation.
1. Solitary fork operation is not enabled.
2. It is not permitted to lift the goods for cross country driving.
3. It is not allowed to get the goods by Stand-on Electric Pallet Stacker passing on the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not enabled to make use of inertia force to get the goods.
6. It is not permitted to use braking pressure to expatriation round or easy-to-roll objects.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Car park is not permitted under the following conditions.
1. Contours, slim roads, railway crossings;.
2. Sections with a longitudinal incline greater than 5%.
3. When there is an challenge on one side of the road, the contrary side of the area with the exact same length as the challenge should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844